home *** CD-ROM | disk | FTP | other *** search
- Path: jobe.shell.portal.com!jkesling
- From: jkesling@shell.portal.com (John Darrell Kesling)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Apple 2.5" SCSI HD in A3000?
- Date: 19 Feb 1996 17:05:37 GMT
- Organization: Portal Communications Company -- 408/973-9111 (voice) 408/973-8091 (data)
- Message-ID: <4gaal1$2nt@news1.shell>
- References: <4g0ekj$ebq@nyx10.cs.du.edu> <4g260i$9i3@rapidnet.com>
- NNTP-Posting-Host: jobe.shell.portal.com
- X-Newsreader: TIN [version 1.2 PL2]
-
- Warren Block (wblock@rapidnet.com) wrote:
- >Chris Yardley (jyardley@nyx10.cs.du.edu) wrote:
- >: Does anyone know where to get an adapter or pinout for an Apple 2.5"
- >: SCSI HD so I can hook it to my 3000's scsi bus?
-
- >I went looking for the 2.5-inch pinouts at www.quantum.com, but naturally
- >the only entry they had for those drives had no link!
-
- >Other than obtaining the pin-out, it should just be a matter of
- >custom-wiring a ribbon cable with IDC connectors.
-
- Here are the pinouts for 2.5 inch SCSI drives. Someone else, sorry I've
- lost the name, originally posted this several months ago.
-
- I also have a 2.5 inch SCSI to 3.5 inch SCSI adapter kit that I picked
- up when I had a line on a 2.5 inch SCSI drive. It consists of small
- printed circuit board that plugs into the drive, on the other end of
- the board is a standard 50 pin SCSI connector and a standard power
- connector. The kit also includes a bracket to mount a 2.5 inch SCSI
- drive in a 3.5 inch drive bay. I paid $25.00 plus shipping, at the
- time it was hard to find, might be easier now. If anyone would like the
- adapter kit I have I'll let it go for $20.00 and I'll pay shipping.
-
- Here are the pinouts if you'd like to try making your own.
-
- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
- >From my files...
- Pinouts for Quantum GoDrive SCSI:
-
- This is excerpted, sort of, from the _Go-Drive_40/80S_Product_Manual_,
- copyright 1991 by Quantum Corp.
-
-
- The connector is a single 2 x 25 connector on 2mm centers for power,data
- and SCSI device address. The connector also includes four pins (pins 1-4
- of J2) which are reserved as factory test points.
-
-
- J1 J2
- Pin39 Pin1 Pin1
- | | /
- o o o o o o o o o o o o o o o o o o o o o o o
- o o o o o o o o o o o o o o o o o o o o o o o o
- | |
- Pin40 Pin2
-
- Recommended mating P/N: Dupont 69764-050 or equiv.
-
- ** **
- ** I found 24 and 28 pos dual row 2mm connecters from Digi-Key Corp **
- ** 1-800-344-4539 **
-
- To prevent the possibility of incorrect installation, the hole of the
- mating ocnnector that corresponds to pin 17 of J1 should be plugged. Max
- cable length = 12"
-
- Pins 5-7 of J2 are used for hardware selectable device address as follows:
-
-
- Pin 5 Pin 6 Pin 7 SCSI id
- ----- ----- ----- -------
- hi hi hi 0
- lo hi hi 1
- hi lo hi 2
- lo lo hi 3
- hi hi lo 4
- lo hi lo 5
- hi lo lo 6
- lo lo lo 7
-
- Pin 8 of J2 can be used to drive an LED during periods of drive activity.
-
-
- Signal Pin Signal Pin
- ----------- ---- ----------- ----
- +5V (logic) 1 +5V (logic) 2
- Logic return 3 Logic return 4
- GND 5 DB0 6
- GND 7 DB1 8
- GND 9 DB2 10
- GND 11 DB3 12
- GND 13 DB4 14
- GND 15 DB5 16
- KEY 17 DB6 18
- GND 19 DB7 20
- GND 21 Parity 22
- GND 23 Termination Power 24
- -ATTN 25 -BSY 26
- GND 27 -ACK 28
- -RST 29 -MSG 30
- GND 31 -SEL 32
- -I/O 33 -C/D 34
- GND 35 -REQ 36
- Motor Return 37 Motor Return 38
- +5V (motor) 39 +5V (motor) 40
-
-
- Saved without attribution from Mac.Hdwe
-
- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
-
- --
- ----------------------------------------------------------------------
- John Kesling - jkesling@shell.portal.com or jkesling@norden1.com
- ----------------------------------------------------------------------
- WA8ZGO - via AX.25 packet radio WA8ZGO@W8HHF.OH.USA
- ----------------------------------------------------------------------
-
-